BURNY® 2.5 Plus...


The BURNY® 2.5 Plus CNC control provides an economical shape cutting solution for x-y axis drive shape-cutting machines.

It is part of the BURNY® Products family of Cleveland Motion Controls, internationally recognised for providing shape-cutting control solutions that improve productivity while reducing costs.
At Digital Profile Services we offer the BURNY® 2.5 Plus as an upgrade option for existing cutting machinery - allowing us to offer precision CNC controlled cutting for even the smallest of budgets.
Features Include:
Standard Design and Construction Features:
  1. Two-axis control standard (three-axis optional)
  2. CNC-Microprocessor-based system
  3. Executive operating program stored in non-volatile FLASH memory
  4. State-of-the-art displays
    a) Full ASCII vacuum fluorescent display
    b) High intensity LED indicators
  5. 50/60 Hz 115/230 VAC power requirement
  6. State-of-the-art ICs, LSI and VLSI
  7. TENV cabinet
  8. 110 degree F ambient
  9. Sealed digital feedback encoders (0.0005 is sampling increment)
  10. Membrane keyboard
  11. Non-volatile part storage:
    a) No part storage memory loss if input power fails
    b) Battery backup
  12. Self check on power up
  13. Audio indication for key pushed
  14. Multi-level EMI protection systems

Standard Operational Features:

  1. Prompting
    a) User-friendly in one of 10 languages
    b) 16 character readout displays prompts
  2. BURNY 50 Shape Library
    a) Direct front panel selection
    b) Chain cut or selectable step and repeat
    c) Selectable start point on some shapes
    d) Selectable repeat direction on some shape
    e) Selectable automatic lead-in/lead-out dimensions
    f) Built-in strip mode
  3. Inch/Metric operation selectable.
  4. Choice of automatic, manual and test run with manual entry of:
    a) Selectable preheat time with override capability and selectable pierce ramp speed
    b) Purge delay time for plasma systems
    c) Selection of number of parts to be cut
  5. Displays
    a) Absolute dimensions
    b) Machine status
    c) Program status
    d) Cutting status
    e) Digital cutting speed
    f) Part library
    g) Preheat/Purge delay time
    h) Memory status
    i) Amount of memory remaining
    j) Program size in part storage memory (individual)
  6. Automatic acceleration / deceleration on corners:
    a) Slowdown ramp and acceleration time selectable
    b) Plasma height sensor disable contact activates during slowdown
  7. Return to pierce point or start position (home)
  8. Automatic "cut row" count.
  9. Full back up along programmed path
  10. Automatic or manual lead-in ability allows interlocking lead-in to be used to minimize plate warping
  11. Automatic return to cutter path from jog position (useful when cleaning torch tips)
  12. Dynamic repositioning ("Move Over") during test run or single step mode
  13. Test run mode: Part is executed but all cutting functions are suspended
  14. Single step mode: Block by block verification of the program path
  15. Extensive built-in diagnostics and calibration
  16. Template teach (digitizing)
  17. Selectable kerf compensation
  18. 512K Part storage memory-non-volatile
  19. Create/Edit program (MDI front panel)
  20. Teachable preheat

Options:

  1. Program scaling (.001 to 65)
  2. Automatic plate alignment
  3. Program mirror imaging (x/y axis mirror)
  4. Program rotation in .010 increments
  5. Foreign language prompting-Consult factory
  6. Plasma interface-Hardware option
  7. RS 232/422 serial communication with:
    a) Standard upload/download capability
    b) Enhanced "Program call-down" capability
  8. Transmission isolation/short haul modem
  9. Programmable kerf and feedrate
 
  © 2003 Digital Profile Services, All Rights Reserved. | Site design by Black Knight Graphics Ltd